 |
| PANEL SWITCHES |
| Mfg. by Blue Sea Systems. For applications such as starters, bilge pumps, horns, wipers and engine controls where switching, in addition to circuit protection is required. All panel switches mount in Blue-Sea System's A or B series circuit breaker panels. Supplied with mounting adapter for standard 5/8" circuit breaker mounting hole. Nickel-plated brass and phenolic non-corrosive construction. White actuator. |
| See
all options available |
| |
 |
| TOGGLE SWITCHES |
| Mfg. by Seachoice Products. Black plastic paddle and locking ring with lever seal and knurled cap nut. Sealed to resist water penetration. Requires 15/32" (1.19cm) mounting hole. |
| See
all options available |
| |
 |
| ILLUMINATED TOGGLE SWITCHES
|
| Mfg. by Seachoice Products. Red plastic paddle that illuminates when under load. Complete with locking ring and knurled cap nut. Sealed to resist water penetration. Requires 15/32" (1.19cm) mounting hole. Rated 12V. |
| See
all options available |
| |
 |
| TOGGLE SWITCHES |
| Mfg. by Seachoice Products. All toggle switches have a chrome plated brass handle, mounting stem and face nut. Mounting stems are 15/32" L(1.19cm); 15/32"-32 thread diameter. 12061 is Heavy Duty. S.P.S.T. Non-corrosive construction throughout. Durable, moisture repellent plastic housing. 12071 has 6”(15.24cm) wire leads. With nickel plated “Off-On” indicator plate assembled. Bat handle.
|
| See
all options available |
| |
 |
| STANDARD TOGGLE SWITCHES
|
| Mfg. by Cole Hersee Co. Non-corrosive construction throughout. Durable, moisture repellent plastic housing. Silver contacts. All metal parts are brass. Chrome plated handle, mounting stem and face nut. Keyway in stem for mounting in keyed hole, if desired. Will accommodate weatherproof boot seals and handle extensions. Conservative electrical ratings are 10 amps - 12 V.D.C. lamp load, 15 amps - 12 V.D.C. inductive load, 6 amps - 125 V.A.C., 3 amps - 250 V.A.C. Two positions: off/on. S.P.S.T. Handle is 11/16" long. Mounting stem is 15/32"-32 in diameter, 15/32" long. Fits panels up through 1/4" thick. |
| See
all options available |
| |
|
 |
| HEAVY DUTY SINGLE POLE TOGGLE
SWITCHES |
| Mfg. by Cole Hersee Co. 12-36V DC (25A at 12V) Standard 11/16" handle. Silver contacts. |
| See
all options available |
| |
 |
| HEAVY DUTY DOUBLE POLE TOGGLE
SWITCHES |
| Mfg. by Cole Hersee Co. 12-36V DC (25A at 12V). Standard 11/16" handle. Silver contacts. |
| See
all options available |
| |
 |
| WEATHERPROOF TOGGLE BOOT
SEALS |
| Mfg. by Cole Hersee Co. Durable rubber boot bonded to brass nut for positive seal. Protects against moisture and dirt. Fits standard toggle switches with 15/32"-32 mounting stems. Model 81255 allows toggle handle to protrude. Model 81264 completely covers toggle handle and accommodates toggle handles up through 11/16" long. |
| See
all options available |
| |
 |
| WATERPROOF TOGGLE SWITCH
5/PK |
| Mfg. by Anchor. Made with thermoplastic rubber that is resistant to salt spray, battery acid, oil, gas and ultra-violet radiation. Fits all standard toggle switches with a 15/32" thread body. |
|
anc555105
|
| Our
Price: $23.56 |
|
|
|
