 |
| TURBO 3000 IN-BLOWER |
| Mfg. by Attwood. Patented in-line-design – provides ventilation for engine compartments, galleys, bilges and heads. Mounting feet allow horizontal or vertical installation in confined spaces. Draws 3.1 amps. Uses 3" I.D. hose. |
| See
all options available |
| |
 |
| TURBO 4000 IN-LINE BLOWER
|
| Mfg. by Attwood. Patented in-line-design – provides ventilation for engine compartments, galleys, bilges and heads. Mounting feet allow horizontal or vertical installation in confined spaces. Draws 4.4 amps and is 5-1/2"L x 6-1/16"W x 4-17/32"H and uses 4" I.D. hose. |
| See
all options available |
| |
 |
| IN-LINE BLOWER |
| Mfg. by Rule. Provides ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation. Easily installed on any flat surfaces. Sealed motor shaft for moisture protection. |
| See
all options available |
| |
 |
| BLOWERS |
| Mfg. by Jabsco. Safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flexmount blowers have both inlet and outlet ports designed for slip-on flexible duct connections. With motor attached mounting bracket and are ideal when in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. With mounting flange on discharge port. Inlet port can be connected with duct hose to area requiring ventilation.
|
| See
all options available |
| |
|
 |
| CONTINUOUS HEAVY DUTY BLOWERS
|
|
Mfg. by Jabsco. Minimum life of 10,000 hours, making them ideal for general engine room or genset enclosure ventilation. They are also well suited for general ventilation of head or galley areas and any application that requires regular extended operation. Rated at 250 CFM.
|
| See
all options available |
| |
 |
| VINYL VENT HOSE |
| Mfg. by Shields Marine Hose. Used for venting bilge gases and fumes. PVC hose supported by vinyl coated helical wire. Resistant to ozone, sunlight and weathering. White, 50' Carton.
|
| See
all options available |
| |
 |
| 402 VINYLVENT- FOR BILGE
FUMES PVC |
| Mfg. by Shields Marine Hose. Supported by anodized wire helix. Resistant to UV and ozone. Black. |
| See
all options available |
| |
 |
| XTRA-HD BLK VINYLVENT 3"
X 50' |
| Mfg. by Shields Marine Hose. Used for venting bilge gases and fumes. Where durability and long service life is required. Heavy gauged PVC hose supported by vinyl coated helical wire. Resistant to ozone, sunlight and weathering. Black, 50' Carton. I.D.": 3. O.D.": 3-1/8. |
|
shi4203000
|
| Retail
Price: $164.50 Our
Price: $86.68 |
|
|
|
