 |
| PAR-MAX BILGE/LIVEWELL |
| Offers 3.8 GPM, run-dry ability in a low compact profile design. Heavy duty motor has a special waterproof coating for harsh environment applications. Motors are thermal overload protected and meet USCG requirements including ignition protection. Includes 362000000 pumpgard strainer. Volts: 12VDC. Amp Draw @ 10PSI: 6. GPM/ LPM: 3.8/14,4. Dimensions" H x W x L: 4-1/16 x 4-1/8 x 7-1/4. |
|
itt317050092
|
| Retail
Price: $198.65 Our
Price: $147.32 |
|
|
 |
| MEDIUM & HEAVY DUTY DIAPHRAGM
PUMPS |
| Provide dependable service and top performance. Self-priming so they can be remotely mounted in a high and dry location. Unique run-dry diaphragm design. Belt drive and rubber mounting pads reduce noise and vibration. Long life permanently lubricated ball bearings. Corrosive resistant base assembly. Inlet and outlet ports for 3/4" ID hose. Volts 12VDC. |
| See
all options available |
| |
 |
| PAR 34600 BILGE PUMPING SYSTEM
|
| Fully serviceable, bilge pump. 645 gph open flow output. Self-priming up to 10' vertical lift, allows mounting above wet bilges. Diaphragm design allows extended dry running. Permanently lubricated ball bearings add to pump life. Complies with USCG 183.410 and ISO 8846 Marine (Ignition protection). ISO 8849 Marine (bilge pump standard). Fitting: connections for 1" ID hose. Dimensions 9-3/16"L x 8-5/8"W x 10-1/2"H. |
| See
all options available |
| |
|
 |
| DIRECT-DRIVE BILGE/SHOWER
DRAIN PUMPS |
|
Inexpensive yet have the performance and features of higher priced pumps. Self-priming allows them to be mounted above bilge and sump areas with only the intake hose in the bilge. Run-dry design. 37202 is fully corrosion resistant and quiet running. Self primes to 6ft. Tough plastic body with ports for 3/4" I. D. hose. Volts 12VDC.
|
| See
all options available |
| |
 |
| PUMPGARD IN-LINE STRAINER
|
| Keeps debris from clogging pump. Runs clearer, longer with less repairs. Clear plastic housing for quick inspection. One screw disassembly and easy cleaning of 1/16" mesh stainless steel screen. Recommended for use with “pressure Max” water pressure system. No mounting is required, just cut intake line and insert. 3/4" slip-on hose connections. Uses replacement screen 361390000. |
| See
all options available |
| |
 |
| PUMP STRAINER 5/8" BRASS
|
| Keeps debris out of bilge and water level to less than 1/2". 1" high and 2-3/8" in diameter. 1/8" x 3/8" strainer channels. Fits almost any bilge area. Sturdy one piece brass casting. 5/8" slip-on hose. |
|
itt145550000
|
| Retail
Price: $30.58 Our
Price: $26.09 |
|
|
|
