 |
| MARINE TEX EPOXY |
|
Mfg. by Marine Tex. Handles like putty, hardens like steel and sands like wood. Non-magnetic, non-rusting and non-corrosive. Self hardening plastic metal. Repairs damaged and leaky hulls, dry rot, cracked crank cases, engine blocks, fuel tank leaks, water tanks, piping, food containers. Provides adhesive and barrier coat for mounting anodes on ships. Impervious to oil, grease, brine, detergents and other chemicals on board. Will not shatter when bumped. Unaffected by cold as low as -60° F and heat as high as 300° F. Simple, fast and effective. Can be sanded, drilled, sawed, threaded and painted.
|
| See
all sizes/colors available |
| |
 |
| ALUMINOX REPAIR STICK - 4
OZ |
|
Mfg. by Evercoat Marine. Permanently repairs holes, gouges, cuts, and rivet leaks in aluminum boats and RV’s. Seals leaks in fuel and water tanks and can repair electrolysis damage. 7 minute work time. Cures steel-hard in 30 minutes. Can be sanded, filed and painted.
|
|
fib108020
|
| Retail
Price:
$16.99 Our
Price:
$9.96
|
| |
 |
| MARINE-TEX RAPID-SET GRAY
KIT |
|
Mfg. by Marine Tex. A convenient repair paste, one to one mix, for emergency or permanent repairs. Bonds to wood, steel, aluminum and fiberglass. Cures in one hour at 72° F. Can be drilled, tapped and sanded. 2 oz. Gray.
|
|
trarm320k
|
| Retail
Price:
$9.49 Our
Price:
$8.51
|
| |
 |
| EVERFIX EPOXY STICKS - 4
OZ |
|
Mfg. by Evercoat Marine. Handles like clay, bonds like epoxy, and hardens like steel in 20 minutes. Repairs manifolds, exhaust lines, water tanks, and even cures underwater. Can be sanded, painted, drilled, filed, and tapped. Will not dry out after opening.
|
|
fib108015
|
| Retail
Price:
$14.49 Our
Price:
$8.99
|
| |
 |
| EPOXY GLUE SYRINGE |
|
Mfg. by Evercoat Marine. A two part epoxy that comes in a handy syringe dispenser. The epoxy will set in ten minutes and will cure in temperatures as low as 0° F.
|
|
fib108017
|
| Retail
Price:
$11.99 Our
Price:
$7.50
|
| |
 |
| "GIT-ROT" KIT |
|
Mfg. by BoatLIFE. The perfect cure for dry rot and restores the strength of wood. Pours into finest openings, penetrates deep and completely saturates wood, arresting the progress of dry rot by encapsulating fibers. Cures into tough, resilient adhesive that bonds wood members together with mass stronger than the original. Ideal for wood encapsulated by fiberglass such as transoms, stringers, keels, etc.
|
| See
all sizes available |
| |
|
|
| TWO PART POUR FOAM - 1/2
GALLON |
|
Mfg. by Evercoat Marine. Fill boat cavities, pontoons and floating dock blocks. Make your own buoy markers. Just mix and pour this foam to fill cavities and increase buoyancy. This 2-lb density foam will increase flotation, insulation and fill gaps. Mix 1:1. This quick formula allows approximately twenty seconds for mixing and pouring. Sets in place in less that 10 minutes. Ready to use in hours.
|
|
fib105612
|
| Retail
Price:
$107.91 Our
Price:
$72.83
|
| |
|
| SKID-NO-MORE |
|
Mfg. by Evercoat Marine. Put a stop to skidding around! Paint on. Resilient. Works indoors or out. Covers metal, wood, fiberglass and concrete. For docks, decks, steps, patios, porches, diving boards and more. Can be color tinted with Evercoat coloring agents. Applies like latex paint. 2 coats are recommended for finished, carpet-like look. Color: Basic Gray.
|
| See
all sizes available |
| |
 |
| COLORING AGENTS |
|
Mfg. by Evercoat Marine. Popular gel-matched coloring agents that blend with polyester resins, gel paste, epoxy resins, Formula 27, Skid-No-More and putty.
|
| See
all colors available |
| |
 |
| SPREADER SET 3/CARD |
|
Mfg. by Evercoat Marine. A set of 3 flexible, long lasting spreaders in different sizes. For fast, smooth application of resins, body filler or crack filler. 3" x 4".
|
|
fib100381
|
| Retail
Price:
$4.29 Our
Price:
$3.20
|
| |
 |
| GLUVIT WATERPROOF EPOXY SEALER
|
|
Mfg. by Marine Tex. Paintable epoxy seeks, fills and seals cracks in fiberglass, wood and metal. Hard protective coating flexes with hull movements. Deteriorated wood can be renewed with a few strokes to penetrate and strengthen stringers, decking and molding. Also seals leaky aluminum seams, rivets, and leaks around cabins or decks. On wooden hulls, Gluvit seals and protects planks and sheeting against water absorption and marine parasites. On aluminum hulls, Gluvit seals seams and rivets and acts as a barrier coat to minimize glavanic corrosion. Long working time. Easily topcoated with bottom or topside coatings and most paints. 2 lb. unit covers approx. 25 to 35 sq. ft. 6 to 8 mils.
|
| See
all sizes available |
| |
|
